Antares

ANTARES doors are made for use with the Scrigno Armonico frame. The sliding door disappears only partially (half swinging and half sliding), allowing this frame to be installed where only limited space is available. The hinged panel of the door opens to 90°. The door is composed of two flush hollow-core panels with a thickness of 40 mm, and is supplied with a bottom groove for the floor guide (only on external panel) and pre-mortised for the Kit Chiudiscrigno handle with lock (not included). The version with double doors is pre-mortised for the Kit Chiudiscrigno handle without lock.
ANTARES sliding doors are available in these finishes: light Tanganyika, walnut Tanganyika, semi-finished Tanganyika and white lacquered.
Brown sealing strips are supplied for all wood models, with grey seals for the white lacquer version. The hinges supplied as standard accessories are finished in polished brass or polished chrome according to the handle finishing.
The uprights of the frame surround are rounded, with flat crosspieces at the top.

Technical characteristics of door panel

• model made from two flush hollow-core panels with thickness 40 mm;
• finishes available: Light Tanganyika, Walnut Tanganyika, Sanded Tanganyika, RAL 9010 White Lacquer;
• lower groove for floor guide (on rear panel only);
• single doors are always pre-drilled for "Kit Chiudiscrigno" handles with lock (not included). On request, you could have pre-drilled doors for different handles or doors without pre-drilled holes;
• hinges included as standard accessories are in polished brass
• sealing strips are brown for all finishes, except for White Lacquer, for which the sealing strip is grey.

Available in these versions:

• Antares Sliding door
• Antares Double Door
• Antares Left and Right Door

Characteristics of door post and architrave

• door posts are ready cut to size for the door panel size chosen;
• the architrave must be cut to fit the clear opening size during installation;
• the rounded architrave is supplied with a 5 mm projection for standard installation. In case of additional thickness due to wall tiles, a rounded architrave with 20 mm projection is available on request.