Gemini

GEMINI sliding doors are made for use with the Scrigno Applauso frame. The hinged door panel folds over onto the other panel, like or book or like two hands clapping, enabling a sliding disappearing door of normal dimensions to be installed even when only limited space is available. The version with double doors can be used for openings up to 240 cm in width, with only minimum space occupied by the frames embedded in the wall. The door is composed of two hollow-core panels with a thickness of 40 mm, and is supplied with a bottom groove for the floor guide (only on external panel) and pre-mortised for the Kit Chiudiscrigno handle with lock (not included). The version with double doors is pre-mortised for the Kit Chiudiscrigno handle without lock.
GEMINI sliding doors are available in these finishes: light Tanganyika, walnut Tanganyika, semi-finished Tanganyika and white lacquered. Brown sealing strips are supplied for all wood models, with grey seals for the white lacquer version. The hinges supplied as standard accessories are finished in polished brass or polished chrome according to the handle finishing. The uprights of the frame surround are rounded, with flat crosspieces at the top.

Technical characteristics of door panel

• model made from two flush hollow-core panels with thickness 40 mm;
  finishes available: light Tanganyika, Walnut Tanganyika, Sanded Tanganyika, RAL 9010 White Lacquer;
• lower groove for floor guide (on rear panel only);
• single doors are always pre-drilled for "Kit Chiudiscrigno" handles with lock (not included).
• The version with double doors is pre-mortised for the Kit Chiudiscrigno handle without lock.
• hinges included as standard accessories are in polished brass or in chrome brass;
• sealing strips are brown for all finishes, except for White Lacquer, for which the sealing strip is grey;
• Per la produzione delle porte e degli stipiti vengono utilizzati tranciati naturali. Questo potrebbe comportare possibili differenze di tonalità fra le varie componenti

Available in these versions:

• Gemini Sliding door
• Gemini Double Door
• Gemini Left and Right Door

Characteristics of door post and architrave

• vertical architrave sections are rounded and horizontal sections are flat. All architrave sections must be cut to fit the clear opening size during installation;
• the architrave is supplied with a 5 mm projection for standard installation. In case of additional thickness due to wall tiles, an architrave with 20 mm projection is available on request.